KYF Air Inflation Flotation Cell
Introduction
An air-inflation mechanical agitation flotation cell without slurry suction（This type of cell is designed referring to Finland Autoquenpu OK floatation cell）
Effective Volume
1～38m3
Product Improvement
Taper impeller with its blades sloping backward at certain angle, simple structure, strong agitation ability, and low energy consumption
The impeller is equipped with holey cylinder air allocator. The air scattering is uniform and the mixing effect of air and slurry is good
U-shaped tank, little sedimentation of sand
♦ Advantages
Low energy consumption, 30-50% savable
Solid particles can be fully suspended; high flotation index
Long service life of vulnerable parts
Mechanical agitation; non-automatic air and slurry suction; ladder is necessary during processing
It can be combined with model XCF as a flotation cell set, working as direct flow cell
♦ Work Principle
When the flotation machine works, the motor drives the impeller to revolve, so the centrifugal effect and negative pressure are produced. On one hand, ample air is absorbed and mixed with mineral slurry, on the other hand, the mixed mineral slurry is mingled with additive, meanwhile, the foams are thinning, the mineral is bounded with foams, and floats up to the surface of mineral slurry and the mineralized foam is formed. The liquid surface can be adjusted with the height of adjustment flashboard, so that the useful foams are scraped with squeegee.
♦ Product Structure
KYF air inflation floatation cell has U tank floatation cell and column flotation cell which is composed of impeller, stator, main shaft, bearing body, air adjusting valve, and tank body.
KYF air inflation floatation cell is applied in roughing and cleaning of large and middle scale dressing plant aiming to non-ferrous metal, ferrous metal and nonmetal minerals. The range of feeding particle size is 0.3～0.01mm (-0.0074mm contents > 50%)
Products Detailed Parameters>>
